Affordable Training & Forklift Certification
Forklift Academy.Com
Since 1995
(877)388-3239
On-site Forklift Certification Training

click HERE for a quote:

Training Certification includes:

Complete OSHA Compliance Forklift Certification training includes an interactive
video (in VHS format) "Forklift Training", CD power point presentation, instructor
guide, new OSHA regulation, forklift compliance and operator guide, daily
inspection checklist, attendance sheet, written & driving tests, certificates and
wallet cards .

Classroom Training:
A combination of video, power point presentation, models and interactive
discussion provides an interesting and informative session. A written test checks
student comprehension. Completion certificates provided at the end of the class.
Records can be maintained for recall.

“On the Equipment” Evaluation:
Jobsite hazard evaluation, pre-operational equipment inspection, operational
instruction and a pass/fail operational test are combined to reinforce training.

Major Topics:
OSHA Requirements (understanding & regulation), Controls & Instrumentation,
Engine Operation and Maintenance, Steering and Maneuvering, Visibility, Fork &
Attachment Limitations, Rated Capacities, Stability, Inspection & Maintenance,
Refueling, Load Manipulation, Pedestrians, Hazardous Locations & Rough
Terrain Operation

Does the Forklift Certification meets OSHA requirements?
Yes, the Training meets OSHA and Cal-OSHA requirements and can be use by
any type of companies in the industry.

How long the Certification will last?
The certification will last for 3 years. You can renew the certification after 3 years.

An employee evaluation of the skills necessary for forklift safety in your workplace
is what OSHA requires before the employer signs that the employee is certified.

Our forklift training consultants provide all the tools and information that is
required by OSHA regarding certifying an employee. The certification process is
simple, yet a very important decision that will affect the health and safety of both
the operator and pedestrian employees.

How do employees get certified?
Forklift certification is a three step simple process.
Forklift training: 2 types of training

    Formal forklift training
   Practical forklift training

Evaluation
After the training, the employer must evaluate the employee's driving ability on the
employers forklift.  The employer must document this evaluation.  Just because
an employee was evaluated driving a forklift, does not automatically mean that
they are certified.

Certification
The employer must then certify that the employee may drive forklifts for that
employer.  This is the easiest stage of the process.  However; this is by far the
most important issue for the employer.  If the employer certifies the employee, the
employer is in essence certifying that the employer has provided the training
outlined by OSHA and that the employee is competent to operate a power
industrial truck.

Does the certification have an expiration date?
Yes, the certification expires three years from the date of the prior evaluation. 
Once the employee is certified, the employer must re-evaluate the employee in the
workplace every three years.

What types of equipment are covered by the standard?
Vehicles covered include:
* High lift trucks
* Counter-balanced trucks
* Cantilevered trucks
* Rider trucks
* Forklift trucks
* High lift platform trucks
* Low lift trucks
* Low lift platform trucks
* Motorized hand trucks
* Pallet trucks
* Narrow aisle rider trucks
* Straddle trucks
* Reach rider trucks
* Single side loader rider trucks
* High lift order picker rider trucks
* Motorized hand/rider trucks
* Rough terrain trucks

Please refer to OSHA standard for training of truck operators located in 29 CFR
1910.178(l)

Why Obtain a certification to operate a forklift?                 
The General Industry Standard states:
"It is a violation of Federal law for anyone UNDER 18 years of age to operate a
forklift or for anyone OVER 18 years of age who is not properly trained and certified
to do so."

On May 29, 1971 (36 FR 10466), OSHA adopted some of the existing Federal
standards and national consensus standards as OSHA standards under the
procedures described in section 6(a) of the Occupational Safety and Health Act
(OSH Act) (29 U.S.C. 655, et.al.). Section 6(a) permitted OSHA to adopt, without
rulemaking, within 2 years of the effective date of the Act, any established Federal
standard or national consensus standard.

Only trained and authorized operators shall be permitted to operate a powered
industrial truck. Methods of training shall be devised to train operators in the safe
operation of powered industrial trucks.

In that consensus standard, a powered industrial truck is defined as a mobile,
power-driven vehicle used to carry, push, pull, lift, stack, or tier material. One truck
may be known by several different names. Included are vehicles that are
commonly referred to as high lift trucks, counterbalanced trucks, cantilever trucks,
rider trucks, forklift trucks; high lift trucks, high lift platform trucks; low lift trucks, low
lift platform trucks; motorized hand trucks, pallet trucks; narrow aisle rider trucks,
straddle trucks; reach rider trucks; single side loader rider trucks; high lift order
picker rider trucks; motorized hand/rider trucks; or counterbalanced front/side
loader lift trucks. Excluded from the scope of the OSHA standard are vehicles
used for earth moving or over-the-road haulage.
Training Certification KIT includes:

Complete OSHA Compliance Forklift Certification training kit includes, a CD power point presentation, FREE Forklift Operator Training Video, instructor guide, new OSHA regulation, forklift compliance and operator guide, daily inspection checklist, attendance sheet, written & driving tests, certificates (20), and wallet cards (20)...more
Forklift Certification Train the Trainer KIT-Training

English Version (Reg Price $379.00)
SPECIAL Offer $299.00 !!! (+$10.00 S&H)

               




Spanish Version
(Reg Price $435)  
SPECIAL Offer $329.00 !!! (+$10.00 S&H)
Trainer KIT
Trainer KIT-SPN
[Home] [For Business] [For Individuals] [On Site Training] [About Us] [Blog]